Jump to content
Artboard 1Artboard fwCheckmarkclose-chubbyCombined ShapeexpandExternal-LinkUntitled-3gridlkab-breadcrumb-startinfoUntitled-1listplay-linkplay-sololkab-printikon-sök-lkabTwitterYouTube
Illustration of how sub-level caving looks like.

The unique Wassara hammer was initially developed for sub level caving and can easily increase the length of blast holes way beyond 60 meters.

Scaled up production with longer blast holes

The LKAB mining company owns the two largest iron ore underground mines in the world. When they made the transition from a regular top hammer to the unique Wassara hammer, the length of the blast holes was increased by 100%, from about 28 meters to 56 meters. This resulted in a decreased number of sub levels by 70% whereas the volume of ore per drilled meter increased by 500%.

Due to the nature of the orientation and shape of a typical ore body that is being mined with sub-level caving, the mine design truly benefits from the advantages of using the Wassara hammer. The length of the blast holes can easily be increased to way beyond 60 meters, basically as long as the toe spacing allows. By increasing the length of the blast holes, the amount of sub levels decreases significantly.

Increased productivity

With the increased volume of ore per drilled meter, the overall productivity is significantly increased. Also, the controlled amount of deviation leads to a more homogeneous fragmentation which increases the overall throughput of the whole mining process. This is particularly beneficial for large-scale mining methods such as sub-level caving.

Higher accuracy increases ore recovery

Wassara allows for drilling of blast holes. The controlled amount of deviation results in a blast that enables optimal ore recovery, since the risk of getting ore stuck and left behind the dilution in the rock flow is considerably decreased.


Drill design that Wassara turns into reality

Scaling up from 28 to 56 meters between the levels increased productivity and lowered overall costs at LKAB