Artboard 1Artboard 1Checkmarkclose-chubbyCombined ShapeexpandExternal-LinkUntitled-3gridlkab-breadcrumb-startinfoUntitled-1listplay-linkplay-sololkab-printikon-sök-lkabTwitterYouTube

Can I use the water/mud pump on the core drilling rig for Wassara?


Yes. For setting casing with Wassara, the standard water/mud pump is enough. The pressure needs to be 50-60 bar and the flow approx. 100 l/min. A standard water pump for core drilling gives 70 bar and 140 l/min.

For precollaring with Wassara in solid rock you will need a high pressure water pump, with 200 bar and 400 l/min. This pump you normally don’t have on a core drilling site, so it is an extra investment.