The Water pumps that are offered by Wassara are designed and made for the purpose of driving water powered hammers. This means that the pump is suitable for providing the flow and pressure that the Wassara hammer needs to do the drilling as well as to handle the general work environment that is on and around a drill site.
The pump should be chosen with consideration to what hammers sizes it should drive. This is important both for having a pump that can be adjusted to match what is needed from a drilling point of view, but also to find an energy efficient solution
Our two general versions
Features
Common features that are delivered in most pumps:
The pumps are designed to be practical and easy to operate, however the operator needs to understand the principles of a water pump to be able to handle the pump efficient.
The experience of designing pumps for many years has resulted in pumps that require a minimum of service and can be expected to produce day in and day out. Some maintenance is, however, needed; such as changing seals, valve seats, parts in the regulation mechanism and sensors when needed.
Suppliers
We cooperate with several suppliers to build the pumps that meet expectations. Our current two main suppliers are:
.
General chart of common models
Pump size: | Small | Medium | Large |
---|---|---|---|
Model | WASP 80 | WASP100 | WASP200 |
Capacity | 300 l/min @ 200bar | 450 l/min @ 200bar | 650 l/min @ 200bar |
Alternative | 815 l/min @ 150 bar | ||
Hammer | W50-W80 | W70-W100 | W100-W200 |
.
When defining a pump consider the following
Based on the above specifications an offer can be provided.
If you have any questios or want to place an order feel free to contact our distributors, that are found world wide, and they will help you.